Stainless Steel Tubing, Fittings & Valves
Stainless Steel Products
- FDA Tubing
- Fittings
- Sanitary Valves
- Industrial Valves
|
|
Stainless Steel FDA Tubing
- 304 and 316L Stainless
- Sizes: ¾" thru 8"
- Gauges: 12-16
|
- Polished ID and OD (ASTM Spec #A270 - FDA)
- Bright Annealed (ASTM A269)
- Available in 20 Ft. Lengths
|
*Cut lengths are also available
Stainless Steel Fittings
Stainless Steel Plate Flanges:
½" Thick, 150# Flanges, 304 Stainless Steel and 316L Stainless Steel
| Tube Flanges: |
Sizes: 1"-12" |
| Blind Flanges: |
Sizes: 1"-24" |
| Pipe Flanges: |
Sizes: 1"-24" |
|
¾" Thick, 150# Flanges, 304 Stainless Steel and 316L Stainless Steel |
| Pipe Flanges: |
Sizes: 2" - 24" |
Stainless Steel Tube Hangers:
Hexagonal Tube Hangers With PVC Inserts:
- Sizes: ½"-6"
- Hanger base is T304 Stainless Steel
- Max Temp of Sleeve 230 F
Stainless Steel Spray Balls:
Sanitary Spray Balls:
- 100% T316L Stainless Steel
- Polished to a 180 grit finish inside and outside
|
- Sizes: 1" and 1-1/2"
- Spray Pattern: 360, 180 Top, 180 Bottom
|
Stainless Steel Butt Weld Fittings:
Elbows:
Polished and Unpolished
45 and 90 Degrees
Elbows with Tangents |
Polished Crosses:
Polished End Caps:
Type A (VB)Stub Ends:
Male NPT x Weld End Adapters: |
| |
Tees: Polished and Unpolished
Concentric Reducers: Polished and Unpolished
Eccentric Reducers: Polished and Unpolished
Reducing Tees: Polished and Unpolished
Polished Laterals: |
|
Stainless Steel Clamp Fittings:
Single Pin Heavy Duty Clamps with Wing Nut:
Long Weld Clamp Ferrules:
90 Elbows:
Solid Clamp End Caps: |
Male NPT Clamp Adapters:
Female NPT Clamp Adapters:
Clamp Gaskets: |
Stainless Steel Bevel Seat Fittings:
Union Hexagonal Nuts:
Long Plain Bevel Seat Ferrules:
Recessed Plain Bevel Seat Ferrules:
Long Threaded Bevel Seat Ferrules: |
Recessed Threaded Bevel Seat Ferrules:
Plain Bevel Seat Solid End Caps:
PTFE Bevel Seat Gaskets: |
Stainless Steel I-Line and Q-Line Fittings:
Heavy Duty Clamps:
Long Female Ferrules
Long Male Ferrules: |
Short Weld Females:
Short Weld Males: |
Stainless Steel John Perry Fittings:
End Caps:
Long Female Ferrules:
Long Male Ferrules: |
Short Weld Female Ferrules:
Short Weld Male Ferrules:
Nut Hex Unions: |
Stainless Steel Schedule 5/10/40 Fittings:
Schedule 5 End Caps:
Schedule 5 Single Pins: |
Schedule 5 Light Wall Spud:
Schedule 5 Short Weld: |
Stainless Steel Sanitary ValvesStainless Steel Sanitary Clamp Butterfly Valves:
- T316L Stainless Steel
- Sizes: 1" - 4"
- Seal Materials available in EPDM or Viton
|
- All wetted Surfaces are sanitary finished to 32Ra
- Operating Temperature Range: 15 F to 200 F
|
Stainless Steel Sanitary Three Piece Clamp Ball Valves:
- Sizes: ½" - 4"
- Clamp End
- Body Working Pressure: 1000PSI WOG
- Clamp End Working Pressure: 200 PSI WOG
- Working Temp: -4 F to 392 F
|
- Investment Casting
- Blow-out Profft Stem
- Cavity Filled Seats
- Locking Device
- ISO 5211 Mounting Pad
|
Stainless Steel Sanitary Clamp Check Valves:
- T316L Stainless Steel
- Sizes: 2", 3", 4"
- Full Size Plow Plate
- Long Stem Bushing for Increased Cycle Life
|
- Suitable for Low and Medium Viscosity Fluids
- Field Serviceable
- Maximum Operating Temperature: 200F
- Maximum Operating Pressure: 145 F to 200 F
|
Stainless Steel Industrial Valves
Stainless Steel Butterfly Valves:
Stainless Steel Wafer Style Butterfly Valves:
- Working Pressure: 232 PSI
- ANSI Class 150#
|
- Lever Operated
- Sizes: 2" - 8"
|
Stainless Steel Lug Style Butterfly Valves:
- Working Pressure: 232 PSI
- ANSI Class 150#
|
- Lever Operated
- Sizes: 2" - 8"
|
Stainless Steel Lug Style Spring Return Pneumatic Butterfly Valves:
- Working Pressure: 232 PSI
- ANSI Class 150#
|
- Actuator Air Suply Pressure: 72.5 PSI
- Sizes: 2" - 6"
|
Stainless Steel Lug Style Double Acting Pneumatic Butterfly Valves:
- Working Pressure: 232 PSI
- ANSI Class 150#
|
- Actuator Air Supply Pressure: 72.5 PSI
- Sizes: 2" - 6"
|
Stainless Steel Ball Valves:
Stainless Steel 1/2/3 Piece Threaded Ball Valves:
- Full Port and Reduced Port
- Working Pressure: 1000 PSI thru 1500 PSI on Two Piece Valves
- Working Temperature: -4 F to 392 F
- Investment Casting
- Blow Out Proof Stem
|
- Anti-Static Device
- Locking Device
- Thread Type: ASME B1.20.1 (NPT), ISO228/1 & ISO7/1
- Sizes: ¼ - 4"
|
Stainless Steel Three Piece Spring Return Pneumatic Threaded Ball Valves:
- Full Port
- Working Pressure: 1000 PSI
- Working Temperature: -4 F to 392 F
- Investment Casting
- Blow Out Proof Stem
|
- Anti-Static Device
- Locking Device
- Thread Type: ASME B1.20.1 (NPT), ISO228/1 & ISO7/1
- Actuator air supply pressure: 72.5 PSI
- Sizes: 1/2" - 2"
|
Stainless Steel Three Piece Double Acting Pneumatic Threaded Ball Valves:
- Full Port
- Working Pressure: 1000 PSI
- Working Temperature: -4 F to 392 F
- Investment Casting
- Blow Out Proof Stem
|
- Anti-Static Device
- Locking Device
- Thread Type: ASME B1.20.1 (NPT), ISO228/1 & ISO7/1
- Actuator air supply pressure: 72.5 PSI
- Sizes: 1/2" - 2"
|
Stainless Steel Three Piece Socket Weld Ball Valves:
- Full Port
- Working Pressure: 1000 PSI
- Working Temperature: -4 F to 392 F
- Investment Casting
- Blow Out Proof Stem
|
- Anti-Static Device
- Locking Device
- Socket Weld Ends Conform to ANSI
- Sizes: 1/2" - 4"
|
Stainless Steel Two Piece Flanged Ball Valves:
- Full Port
- Working Pressure: 232 PSI
- Working Temperature: -4 F to 392 F
- Investment Casting
- Blow Out Proof Stem
- Anti-Static Device
|
- Locking Device
- ISO 5211 Mounting Pad
- API 607 Fire Safe Approved
- Flange Dimension: ASME/ANSI Class 150#
- Face to Face: ANSI B16.10
- Sizes: 1" - 6"
|
Stainless Steel Check Valves:
Stainless Steel Threaded Check Valves:
- Working Pressure: 200 PSI WOG
- Working Temperature: -4 F to 392 F
- Investment Casting
|
- Thread Type: ASME B1.20.1 (NPT), ISO228/1 & ISO7/1
- Sizes: 1/2" - 3"
|
Stainless Steel Socket Weld Check Valves:
- Working Pressure: 200 PSI WOG
- Working Temperature: -4 F to 392 F
|
- Investment Casting
- Sizes: 3/4" - 2"
|
Stainless Steel Flanged Check Valves:
- Working Pressure: 232 PSI
- Working Temperature: -4 F to 392 F
- Investment Casting
|
- Flange Dimension: ASME/ANSI Class 150#
- Sizes: 1-1/2" - 6"
|
Stainless Steel Gate Valves:
Stainless Steel Threaded Gate Valves:
- Working Pressure: 200 PSI WOG
- Working Temperature: -4 F to 392 F
- Investment Casting
|
- Non-Rising Stem
- Thread Type: ASME B1.20.1 (NPT), ISO228/1 & ISO7/1
- Sizes: 1/2" - 3"
|
Stainless Steel Flanged Gate Valves:
- Working Pressure: 232 PSI
- Flange Dimension: ASME/ANSI Class 150#
- Working Temperature: -4 F to 392
|
- Investment Casting
- Sizes: 2" - 8"
|
Stainless Steel Globe Valves:
Stainless Steel Threaded Globe Valves:
- Working Pressure: 200 PSI WOG
- Working Temperature: -4 F to 392 F
- Investment Casting
|
- Thread Type: ASME B1.20.1 (NPT), ISO228/1 & ISO7/1
- Sizes: 3/4" - 1-1/4"
|
Stainless Steel Hose
- PTFE Lined
- Metal Lined
- Sooth Bore PTFE Hoses
|
- Convoluted Bore PTFE Hoses
- Over 40 Different Fittings Available
|
Stainless Steel Gauges
- Pressure
- Temperature
- Sanitary
|
- Bi-Metal Thermometer
- Dry & Liquid Styles
- Homogenizer
|
Stainless Steel Pumps
- Sanitary / Tri-Clover
- Diaphragm
|
|
Back to Top |
Print This Page